• Advertisement

WinXP Monitor Refresh Rate Troubleshooting

Post your hot tips, tricks and tweaks that you would like to share.

Moderator: WebHQ Staff

WinXP Monitor Refresh Rate Troubleshooting

Postby Tech@WebHQ » Sun Oct 16, 2005 6:46 pm

Use VGA Mode to Troubleshoot Monitor Refresh Rate Problems

Have you ever accidentally set Window's resolution or refresh rate to a level that was not supported by your monitor, only to find that you could not change it back since the screen had become an unreadable mess? This annoyance remains one of Window's biggest hidden booby traps, especially for users with older monitor hardware.

Setting the refresh rate or resolution higher than your monitor can display will result in a garbled or blank screen, and a huge headache if you accidentally keep the settings. Fortunately Windows XP includes an easy way to reverse monitor resolution problems in the form of 'VGA mode.'

The VGA mode option on the Windows advanced options screen (accessed by pressing F8 repeatedly as your computer is just starting up) will start Windows normally but with a basic VGA video driver at 640x480 resolution and 60Hz refresh rate. Any VGA monitor can handle this, so you will be free to go back into display settings and change them to something your monitor can display properly.

To recap, if you can't see the screen in Windows XP due to refresh rate settings, reboot your system, pressing 'F8' repeatedly as the computer restarts. From the boot menu, choose 'enable VGA mode'. Once Windows starts up, go to the display settings and try a different resolution and refresh rate setting.
User avatar
Tech@WebHQ
Search Team
Search Team
 
Posts: 343
Joined: Mon Mar 21, 2005 7:06 am
Location: Canada

Postby merchinax » Mon Jun 01, 2009 10:55 pm

What is VGA driver and how do u disable it? I wanted to install ATI and it requires a driver called VGA to be turned off in order to be installed succesfully. Please help me quick.
____________________
affiliateelite ~ affiliateelite.com ~ adgooroo ~ adgooroo.com
Last edited by merchinax on Wed Jun 03, 2009 10:38 pm, edited 1 time in total.
merchinax
Hobbyist
Hobbyist
 
Posts: 1
Joined: Fri May 29, 2009 11:01 pm

Postby Edwin » Wed Jun 03, 2009 12:56 pm

What is the exact error message you get?
User avatar
Edwin
Site Admin
Site Admin
 
Posts: 595
Joined: Tue Jan 18, 2005 10:06 am
Location: Netherlands


Return to Tech Tips and Tweaks

Who is online

Users browsing this forum: No registered users and 1 guest

cron