Motherboard Manuals Data & More

[Jos]

Im looking for the ORIGINAL manual for the Biostar MB8433UUD-A

I know that there are some jumper settings on the internet but if anyone has the original manual in pdf format or something for me I'll be very happy!

Thanx.

[Edwin]

I have not seen a PDF manual for this board. Ever.

There's this which is a bit more than the usual collection:
http://www.elhvb.com/mobokive/Archive/Biostar%20-%20Bioteq/manuals/uud.htm

and we have the specs:

**************
* Features *
**************
80486 MBD with UMC chipset:
CPU:
- Supports 80486 SX/DX/DX2, 80486SL, OverDriver,
DX4, Cyrix M6, DX/DX2/DX4(M7), Cx5x86(M9), AMD 486/DXLT, X5,
UMC-U5.
- 237-pin ZIF white socket (optional).
- 237-pin PGA socket (optional).
- 237-pin LIF socket (optional).

Green Function:
- Power Down Timer from 0.25 to 512 mins.
- Wakes up by any key or mouse activity.

Speed:
- 25/33/40 MHz system and 25/33/20 PCI local bus speed.
- Hardware and Software speed switchable function supported.
- Bus I/O clock 8 MHz for maximum capatibility with add on cards.

DRAM Memory:
- Supports 4 banks 72-pin 1/2/4/8/16/32 MB SIMM module socket.
- Supports DRAM memory up to 128 MB on board.
- Supports EDO DRAM.
- DRAM Type: page mode, 80ns required.

Cache Memory:
- Flexible Cache RAM size 128KB/256KB/512KB.

I/O Bus slots:
- Provides four 16-bit ISA bus slots and three PCI local bus slots.

Flash Memory:
- Supports flash memory.

PCI Enhanced IDE Built-in:
- Supports 4 IDE hard disk drives.
- Supports mode 3, high performance hard disk drives.
- Supports IDE interface CD-ROM.
- Supports high capacity hard disk drives.
- Supports master/slave mode IDE controller.

ISA I/O On Board:
- Supports two 16550 baud rates high speed UARTs.
- Supports one multi-mode parallel port.
1. Standard & Bidirection parallel port.
2. Enhanced Parallel Port (EPP).
3. Extended Capabilities Port (ECP).

Onboard FDD Controller

PS/2 Mouse:
- Supports PS/2 mouse controller. (optional)

Dimension:
- 22cm x 22cm (W x L).

[Jos]

thnx! This will help